Angled Hollow Spray 'H' Oil Burner Nozzles

Flow Rate \| Temp.	SKU	Barcode
0.5GPH \| 60 deg. C	DF560H	5702425016608
0.55GPH \| 60 deg. C	DF5560H	5702425017230
0.6GPH \| 60 deg. C	DF660H	5702425017292
0.65GPH \| 60 deg. C	DF6560H	5702425017049
0.75GPH \| 60 deg. C	DF7560H	5702425017209
0.85GPH \| 60 deg. C	DF8560H	5702425017322
1GPH \| 60 deg. C	DF160H	5702425016868
0.5GPH \| 80 deg. C	DF580H	5702425016943
0.55GPH \| 80 deg. C	DF5580H	5702425016882
0.6GPH \| 80 deg. C	DF680H	5702425016639
0.65GPH \| 80 deg. C	DF6580H	5702425016738
0.75GPH \| 80 deg. C	DF7580H	5702425017070
0.85GPH \| 80 deg. C	DF8580H	5702425016783
1GPH \| 80 deg. C	DF180H	5702425017155

DESCRIPTION:

The Danfoss S & H oil nozzles are designed for use in high-pressure oil burners using light or heavy fuel and are intended for domestic and commercial use.

Angled Hollow Spray nozzles are mainly used on burners with a hollow cone air pattern and for through puts up to 2.00 GPH. The droplet distribution is concentrated on the outside of the cone and results in good ignition and low-noise combustion.